Publikationen

240. Osteocytes Influence on Bone Matrix Integrity Affects Biomechanical Competence at Bone-Implant Interface of Bioactive-Coated Titanium Implants in Rat Tibiae.
Sabine Stoetzel , Deeksha Malhan, Ute Wild, Christian Helbing, Fathi Hassan, Sameh Attia, Klaus D. Jandt, Christian Heiss, Thaqif El Khassawna
International Journal of Molecular Sciences., doi: https://doi.org/10.3390/ijms23010374Externer Link

239. Critical parameters in cultivation of experimental biofilms using the example of Pseudomonas fluorescens.
Kirsten Reddersen, André Güllmar, Silke Tonndorf-Martini, Bernd W Sigusch, Andrea Ewald, Thomas J Dauben, Karin Martin, Cornelia Wiegand
Journal of materials science. Materials in medicine., doi: https://doi.org/10.1007/s10856-021-06568-wExterner Link

238. Infections @ Trauma/Orthopedic Implants: Recent Advances on Materials, Methods, and Microbes—A Mini-Review.
Britt Wildemann ^, Klaus D. Jandt  
Materials., doi: https://doi.org/10.3390/ma14195834Externer Link

237. Effectiveness of Casein Phosphopeptide-Amorphous Calcium Phosphate (CPP-ACP) Compared to Fluoride Products in an In-Vitro Demineralization Model. 
Markus Reise , Stefan Kranz ^, Markus Heyder, Klaus D. Jandt, and Bernd W. Sigusch  
Materials., doi: https://doi.org/10.3390/ma14205974Externer Link

236. Sustainable preparation of anti-inflammatory atorvastatin PLGA nanoparticles.
Christian Grune, Clara Zens, Anna Czapka, Karl Scheuer, JanaThamm, Stephanie Hoeppener, Klaus D. Jandt, Oliver Werz, Ute Neugebauer, Dagmar Fischer
International Journal of Pharmaceutics., doi: https://doi.org/10.1016/j.ijpharm.2021.120404Externer Link

235. Distinct endocytosis and immune activation of poly (lactic-co-glycolic) acid nanoparticles prepared by single-and double-emulsion evaporation.
Lennart Pusch , Regine Brox, Karl Scheuer , Tadahiro Yokosawa , Mingjian Wu , Benjamin Apeleo Zubiri , Erdmann Spiecker , Klaus D Jandt , Dagmar Fischer , Holger Hackstein   
Nanomedicine, doi: https://doi.org/10.2217/nnm-2021-0022Externer Link

234. The Action-Networks of Nanosilver: Bridging the Gap between Material and Biology.
Huiliang Cao, Hui Qin, Yongsheng Li, Klaus D. Jandt    
Advanced Healthcare Materials., doi: https://doi.org/10.1002/adhm.202100619Externer Link

233. Performance of Calcium Phosphate Cements in the Augmentation of Sheep Vertebrae—An Ex Vivo Study
Raimund W. Kinne,  Francesca Gunnella, Elke Kunisch, Sascha Heinemann, Berthold Nies, Stefan Maenz, Victoria Horbert, Bernhard Illerhaus, René Huber, Izabela Firkowska-Boden, Jörg Bossert, Klaus D. Jandt, André Sachse, Matthias Bungartz, Olaf Brinkmann
Materials., doi: https://doi.org/10.3390/ma14143873Externer Link

232. Self-assembled fibrinogen–fibronectin hybrid protein nanofibers with medium-sensitive stability.
Karl Scheuer, Christian Helbing,  Izabela Firkowska-Boden, Klaus D. Jandt     
RSC Advances., doi: https://doi.org/10.1039/D0RA10749BExterner Link

231. Polystyrene Homopolymer Enhances Dispersion of MWCNTs Stabilized in Solution by a PS-b-P2VP Copolymer. 
Yingying Zhou, Izabela Firkowska-Boden, Matthias L. Arras, Kalus D. Jandt
Langmuir., doi:10.1021/acs.langmuir.0c03042Externer Link

230. Biopolymer surface modification of PLGA fibers enhances interfacial shear strength and supports immobilization of rhGDF-5 in fiber-reinforced brushite cement.
Izabela Firkowska-Boden, Ranko Adjiski, Andres Cordero Bautista, Andreas Borowski, Georg Matziolis, Klaus D. Jandt, Raimund W. Kinne, Jörg Bossert
Journal of the Mechanical Behavior of Biomedical Materials., doi:10.1016/j.jmbbm.2020.104285Externer Link

229. Novel protein and peptide nanofibrous structures via supramolecular co-assembly. Artificial Protein and Peptide Nanofibers 1st Edition
Christian Helbing, Klaus D. Jandt
Woodhead Publishing

228. Self-Assembly of Copolyesters into Stereocomplex Crystallites Tunes the Properties of Polyester Nanoparticles
Karl Scheuer, Damiano Bandelli, Christian Helbing, Christine Weber, Julien Alex, Johannes B. Max, Alexis Hocken, Ondrej Stranik, Lisa Seiler, Frederike Gladigau, Ute Neugebauer, Felix H. Schacher, Ulrich S. Schubert,* and Klaus D. Jandt
Macromolecules., doi:10.1021/acs.macromol.0c01247Externer Link

227. ZnO@ZnS nanorod-array coated titanium: Good to fibroblasts but bad to bacteria
Qiming Luo, Huiliang Cao, Lanyu Wang, Xiaohan Ma, Xuanyong Liu
J. Colloid Interface Sci., doi:10.1016/j.jcis.2020.06.055Externer Link

226. Nanotechnology in dentistry: Present and future perspectives on dental nanomaterials
Klaus D. Jandt, David C. Watts
Dental Materials, 2020, doi:10.1016/j.dental.2020.08.006Externer Link

225. How Nanotopography-Induced Conformational Changes of Fibrinogen Affect Platelet Adhesion and Activation
Izabela Firkowska-Boden, Christian Helbing, Thomas J. Dauben, Maja Pieper, and Klaus D. Jandt
Langmuir, 2020, doi:10.1021/acs.langmuir.0c02094Externer Link

224. Copolymerization of Caprolactone Isomers to Obtain Nanoparticles with Constant Hydrophobicity and Tunable Crystallinity
Damiano Bandelli, Irina Muljajew, Karl Scheuer, Johannes B. Max, Christine Weber, Felix H. Schacher, Klaus D. Jandt, and Ulrich S. Schubert
Macromolecules, 2020, doi: 10.1021/acs.macromol.0c00486Externer Link

224. Quantifying the relationship between surfaces’ nano-contact point density and ad3esion force of Candida albicans
Thomas J. Dauben, Carolin Dewald, Izabela Firkowska-Boden, Christian Helbing, Henrik Peisker, Martin Roth, Jörg Bossert, Klaus D. Jandt
Colloids and surfaces B: Biointerfaces, 2020, doi:10.1016/j.colsurfb.2020.111177Externer Link

222. The old sheep: a convenient and suitable model for senile osteopenia.
Stefan Maenz, Olaf Brinkmann, Ines Hasenbein, Christina Braun, Elke Kunisch, Victoria Horbert, Francesca Gunnella, André Sachse, Sabine Bischoff, Harald Schubert, Klaus D. Jandt, Jörg Bossert, Dominik Driesch, Raimund W. Kinne, Matthias Bungartz              Journal of Bone and Mineral Metabolis, 2020, doi: 10.1007/s00774-020-01098-xExterner Link

221. Effect of electric field during deposition of silicon dioxide thin films by plasma enhanced atomic layer deposition: experimental and computational study
Vivek Beladiya, Martin Becker, Tahsin Faraz, Wilhelmus Kessels, Paul Schenk, Felix Otto, Torsten Fritz, Marco Gruenewald, Christian Helbing, Klaus D Jandt, Andreas Tünnermann, Marek Sierka, Adriana Szeghalmi
Nanoscale, 2020, 12, 2089-2102. doi: 10.1039/C9NR07202KExterner Link

220. MBEC Versus MBIC: the Lack of Differentiation between Biofilm Reducing and Inhibitory Effects as a Current Problem in Biofilm Methodology
Thieme L, Hartung A, Tramm K, Klinger-Strobel M, Jandt KD, Makarewicz O, Pletz MW
Biol Proced Online. doi: 10.1186/s12575-019-0106-0Externer Link

219. Poly(3-ethylglycolide): a well-defined polyester matching the hydrophilic hydrophobic balance of PLA
Damiano Bandelli, Julien Alex, Christian Helbing, Nico Ueberschaar, Helmar Görls, Peter Bellstedt, Christine Weber, Klaus D. Jandt and Ulrich S. Schubert
Polymer Chemistry. doi: 10.1039/c9py00875fExterner Link

218. In Vitro Release of Bioactive Bone Morphogenetic Proteins (GDF5, BB-1, and BMP-2) from a PLGA Fiber-Reinforced, Brushite-Forming Calcium Phosphate Cement.
Gunnella F, Kunisch E, Horbert V, Maenz S, Bossert J, Jandt KD, Plöger F, Kinne RW
Pharmaceutics. doi: 10.3390/pharmaceutics11090455Externer Link

217. The poly (l-lactid-co-glycolide; PLGA) fiber component of brushite-forming calcium phosphate cement induces the osteogenic differentiation of human adipose tissue-derived stem cells.
Kunisch E, Gunnella F, Wagner S, Dees F, Maenz S, Bossert J, Jandt KD, Kinne RW.
Biomedical Materials. doi: 10.1088/1748-605X/ab3544Externer Link

216. On the issue of transparency and reproducibility in nanomedicine
Hon S. Leong, Huiliang Cao, Xuanyong Liu, Klaus D. Jandt et al.
Nature Nanotechnology. doi: 10.1038/s41565-019-0523-xExterner Link

215. Microorganisms @ materials surfaces in aircraft: Potential risks for public health? - A systematic review
Bin Zhao, Carolin Dewald, Max Hennig, Jörg Bossert, Michael Bauer, Mathias W. Pletz, Klaus D. Jandt
Travel Medicine and Infectious Disease. doi: 10.1016/j.tmaid.2018.07.011Externer Link

214. Indirect morphological analysis of particles in polymer particle composites via non-destructive permittivity measurements
Mike Mühlstädt, Matthias M.L. Arras, Philip Zimmer, Klaus D. Jandt, and Jörg Bossert
Composites Science and Technology. doi: 10.1016/j.compscitech.2018.11.010Externer Link

213. Nanoconfinement and Sansetsukon-like Nanocrawling Govern Fibrinogen Dynamics and Self-Assembly on Nanostructured Polymeric Surfaces
Xiaoyuan Zhang, Izabela Firkowska-Boden, Matthias M. L. Arras, Mark Kastantin, Christian Helbing, Alper Özogul, Enrico Gnecco, Daniel K Schwartz, and Klaus D. Jandt
Langmuir. doi: 10.1021/acs.langmuir.8b02917Externer Link

212. Maintaining the hydrophilic hydrophobic balance of polyesters with adjustable crystallinity for tailor-made nanoparticles
Damiano Bandelli, Christian Helbing, Christine Weber, Michael Seifert, Irina Muljajew, Klaus D. Jandt, Ulrich Schubert
Macromolecules. doi: 10.1021/acs.macromol.8b00925Externer Link

211. Acetabular Cup with a Trabecular Coating: A Novel Approach to a Monolithic Cup Made of One High‐Strength Ceramic Material
Ranko Adjiski, Mike Mühlstädt, Stefan Maenz, Matthias M. L. Arras, Karen Hans, Claudia Ortmann, Thomas Oberbach, Klaus D. Jandt, Jörg Bossert
Advanced Engineering Materials. doi: 10.1002/adem.201800230Externer Link

210. An advanced geometrical model for laminated woven fabrics using Lamé exponents with enhanced accuracy
M. Mühlstädt, W. Seifert, M.M.L. Arras, S. Maenz, K.D. Jandt, J. Bossert
Journal of Composite Materials. doi: 10.1177/0021998317725570Externer Link

209. Clinical long-term success of contemporary nano-filled resin composites in class I and II restorations cured by LED or halogen light
Torsten Pflaum, Stefan Kranz, Regina Montag, Arndt Güntsch, Andrea Völpel, Robin Mills, Klaus Jandt, Bernd Sigusch
Clinical Oral Investigations. doi: 10.1007/s00784-017-2226-8Externer Link

208. Critical physiological factors influencing the outcome of antimicrobial testing according to ISO 22196 / JIS Z 2801
Cornelia Wiegand , Andrea Völpel, Andrea Ewald, Markko Remesch, Jan Kuever, Janine Bauer, Stefanie Griesheim, Carolin Hauser, Julian Thielmann, Silke Tonndorf-Martini, Bernd W. Sigusch, Jürgen Weisser, Ralf Wyrwa, Peter Elsner, Uta-Christina Hipler, Marti
PLOS. doi: 10.1371/journal.pone.0194339Externer Link

207. The GDF5 mutant BB-1 enhances the bone formation induced by an injectable, PLGA-fiber reinforced, brushite-forming cement in a sheep defect model of lumbar osteopenia
Francesca Gunnella , Elke Kunisch, Stefan Maenzc, Victoria Horbert, Long Xin, Joerg Mika, Juliane Borowski, Sabine Bischoff, Harald Schubert, Andre Sachse, Bernhard Illerhaus, Jens Günster, Jörg Bossert, Klaus D. Jandt, Frank Plögerh, Raimund W. Kinnea, O
The Spine Journal. doi: doi: 10.1016/j.spinee.2017.10.002Externer Link

206. Controlling Protein Adsorption through Nanostructured Polymeric Surfaces
Izabela Firkowska-Boden, Xiaoyuan Zhang, Klaus D. Jandt
Advanced Healthcare Materials. doi: 10.1002/adhm.201700995Externer Link

205. Protein-mimetic peptide nanofibers: motif design, self-assembly synthesis, and sequence-specific biomedical applications
Wensi Zhang, Xiaoqing Yu, Yang Li, Zhiqiang Su, Klaus D. Jandt, Gang We
Progress in Polymer Science. doi: 10.1016/j.progpolymsci.2017.12.001Externer Link

204. Gold nanoparticle contact point density controls microbial adhesion on gold surfaces
Carolin Dewald, Claudia Lüdecke, Izabela Firkowska-Boden, Martin Roth, Jörg Bossert, Klaus D. Jandt
Colloids and Surfaces B: Biointerfaces. doi: 10.1016/j.colsurfb.2017.12.037Externer Link

203. Protein Handshake on the Nanoscale: How Albumin and Hemoglobin Self-Assemble into Nanohybrid Fibers
Christian Helbing, Tanja Deckert-Gaudig, Izabela Firkowska-Boden, Gang Wei, Volker Deckert, and Klaus D. Jandt
ACS Nano. doi: 10.1021/acsnano.7b07196Externer Link

202. Short-time pre-washing of brushite-forming calcium phosphate cement improves its in vitro cytocompatibility
Elke Kunisch, Stefan Maenz, Marie Knoblich, Frank Ploeger, Klaus D. Jandt, Joerg Bossert, Raimund W. Kinne, Saifeddin Alsalameh
Tissue and Cell. doi: https://doi.org/10.1016/j.tice.2017.10.002Externer Link

201. High molar mass amphiphilic block copolymer enables alignment and dispersion of unfunctionalized carbon nanotubes in melt-drawn thin-films
M.M.L. Arras, B. He, K.D. Jandt
Polymer. doi: 10.1016/j.polymer.2017.08.030Externer Link

200. 3D Model of Intra-Yarn Fiber Volume Fraction Gradients of Woven Fabrics
M. Mühlstädt, W. Seifert, M.M.L. Arras, S. Maenz, K.D. Jandt, J. Bossert
Composite Structures. doi: 10.1016/j.compstruct.2017.08.049Externer Link

199. In vitro analysis of biopolymer coating with glycidoxypropyltrimethoxysilane on hernia meshes
S. Metzler, S. Zankovych, F. Rauchfuß, Y. Dittmar, K. Jandt, K.D. Jandt, U. Settmacher, H. Scheuerlein
Journal of Biomedical Materials Research Part B: Applied Biomaterials 105 (2017) 1083-1090. doi: 10.1002/jbm.b.33653Externer Link

198. GDF5 significantly augments the bone formation induced by an injectable, PLGA fiber-reinforced, brushite-forming cement in a sheep defect model of lumbar osteopenia
Matthias Bungartz, Elke Kunisch, Stefan Maenz, Victoria Horbert, Long Xin, Francesca Gunnella, Joerg Mika, Juliane Borowski, Sabine Bischoff, Harald Schubert, Andrea Sachse, Bernhard Illerhaus, Jens Günster Jörg Bossert, Klaus D. Jandt, Frank Plöger, Rai
The Spine Journal. doi: 10.1016/j.spinee.2017.06.007Externer Link

197. Low-dose BMP-2 is sufficient to enhance the bone formation induced by an injectable, PLGA-fiber reinforced, brushite-forming cement in a sheep defect model of lumbar osteopenia
F. Gunnella, E. Kunisch, M. Bungartz, S. Maenz, V. Horbert, L. Xin, J. Mika, J. Borowski, S. Bischoff, H. Schubert, P. Hortschansky, A. Sachse, B. Illerhaus, J. Günster, J. Bossert, K.D. Jandt, F. Plöger, R.W. Kinne, O. Brinkmann
The Spine Journal (2017). doi: 10.1016/j.spinee.2017.06.005Externer Link

196. Nanocrystal width controls fibrinogen orientation and assembly kinetics on poly(butene-1) surfaces
X. Zhang, C. Helbing, M.M.L. Arras, K.D. Jandt, I. Firkowska-Boden
Langmuir 33 (2017) 6563-6571. doi: 10.1021/acs.langmuir.7b01365Externer Link

195. Enhanced bone formation in sheep vertebral bodies after minimally-invasive treatment with a novel, PLGA-fiber reinforced brushite cement
S. Maenz, O. Brinkmann, E. Kunisch, V. Horbert, F. Gunnella, S. Bischoff, H. Schubert, A. Sachse, L. Xin, J. Günster, B. Illerhaus, K.D. Jandt, J. Bossert, R.W. Kinne, M. Bungartz
The Spine Journal 17 (2017) 709-719. doi: 10.1016/j.spinee.2016.11.006Externer Link

194. Postembedding decalcification of mineralized tissue sections preserves the integrity of implanted biomaterials and minimizes number of experimental animals
T. El Khassawna, D.E.S. Daghma, S. Stoetzel, S. Ray, S. Kern, D. Malhan, V. Alt, U. Thormann, A. Henß, M. Rohnke, A. Stengel, F. Hassan, S. Maenz, K.D. Jandt, M. Diefenbeck, M. Schumacher, M. Gelinsky, K.S. Lips, C. Heiss
BioMed Research International (2017). doi: 10.1155/2017/2023853Externer Link

193. Rationally engineered electrodes for high-performance solid-state cable-type supercapacitor
R. Vellacheri, H.P. Zhao, M. Mühlstädt, A. Al-Haddad, K.D. Jandt, Y.Lei
Advanced Functional Materials 27 (2017) 1-7. doi: 10.1002/adfm.201606696Externer Link

192. Presence of calcium lowers the expansion of bacillus subtilis colony biofilms
E. Mhatre, A. Sundaram, T. Hölscher, M. Mühlstädt, J. Bossert, Á.T. Kovács
Microorganisms 5 (2017) 1-13. doi: 10.3390/microorganisms5010007Externer Link

191. Reduced graphene oxide paper: fabrication by a green thermal reduction method and preliminary study of its in vitro cytotoxicity
X. Wang, P. Li, C. Lüdecke, Q. Zhang, Z. Wang, K.D. Jandt
Journal of Nano Research 45 (2017) 199-207. doi: 10.4028/www.scientific.net/JNanoR.45.199Externer Link

190. Responsive copolymer-graphene oxide hybrid microspheres with enhanced drug release properties
F. Dong, I. Firkowska-Boden, M.M.L. Arras, K.D. Jandt
RSC Advances 7 (2017) 3720-3726. doi: 10.1039/C6RA25353AExterner Link

189. Layer-by-layer gelatin/chitosan polyelectrolyte coated nanoparticles on Ti implants for prevention of implant-associated infections
T. Sangfai, F. Dong, V. Tantishaiyakul, K. D. Jandt, C. Lüdecke, O. Boonrat, N. Hirun
eXPRESS Polymer Letters 11 (2017) 73-82. doi: 10.3144/expresspolymlett.2017.8Externer Link

188. pH-dependent ordered fibrinogen adsorption on polyethylene single crystals
C. Helbing, R. Stößel, D.A. Hering, M.M.L. Arras, J. Bossert, K.D. Jandt
Langmuir 32 (2016) 11868-11877. doi: 10.1021/acs.langmuir.6b03110Externer Link

187. Decreased extrusion of calcium phosphate cement versus high viscosity PMMA cement into spongious bone marrow—an ex vivo and in vivo study in sheep vertebrae
L. Xin, M. Bungartz, S. Maenz, V. Horbert, M. Hennig, B. Illerhaus, J. Günster, J. Bossert, S. Bischoff, J. Borowski, H. Schubert, K.D. Jandt, E. Kunisch, R.W. Kinne, O. Brinkmann
The Spine Journal 16 (2016) 1468-1477. doi: 10.1016/j.spinee.2016.07.529Externer Link

186. First-time systematic postoperative clinical assessment of a minimally invasive approach for lumbar ventrolateral vertebroplasty in the large animal model sheep
M. Bungartz, S. Maenz, E. Kunisch, V. Horbert, L. Xin, F. Gunnella, J. Mika, J. Borowski, S. Bischoff, H. Schubert, A. Sachse, B. Illerhaus, J. Gunster, J. Bossert, K.D. Jandt, R.W. Kinne, O. Brinkmann
The Spine Journal 16 (2016) 1263-1275. doi: 10.1016/j.spinee.2016.06.015Externer Link

185. Gentamicin coating of plasma chemical oxidized titanium alloy prevents implant-related osteomyelitis in rats
M. Diefenbeck, C. Schrader, F. Gras, T. Mückley, J. Schmidt, S. Zankovych, J. Bossert, K.D. Jandt, A. Völpel, B.W. Sigusch, H. Schubert, S. Bischoff, W. Pfister, B. Edel, M. Faucon, U. Finger
Biomaterials 101 (2016) 156-164. doi: 10.1016/j.biomaterials.2016.05.039Externer Link

184. Nanorough titanium surfaces reduce adhesion of Escherichia coli and Staphylococcus aureus via nano adhesion points
C. Lüdecke, M. Roth, W. Yu, U. Horn, J. Bossert, K.D. Jandt
Colloids and Surfaces B: Biointerfaces 145 (2016) 617-625. doi: 10.1016/j.colsurfb.2016.05.049Externer Link

183. Hemodynamic aspects of reduced platelet adhesion on bioinspired microstructured surfaces
T.T. Pham, S. Wiedemeier, S. Maenz, G. Gastrock, U. Settmacher, K.D. Jandt, J. Zanow, C. Lüdecke, J. Bossert
Colloids and Surfaces B: Biointerfaces 145 (2016) 502-509. doi: 10.1016/j.colsurfb.2016.05.022Externer Link

182. Study of energy transfer by different light curing units into a class III restoration as a function of tilt angle and distance, using a MARC Patient Simulator (PS)
K.L. Kornerding, M. Heyder, S. Kranz, A. Guellmar, A. Voelpel, D.C. Watts, K.D. Jandt, B.W. Sigusch
Dental Materials 32 (2016) 676-686. doi: 10.1016/j.dental.2016.02.007Externer Link

181. In-situ formation of nanohybrid shish-kebabs during electrospinning for the creation of hierarchical shish-kebab structures
M. Arras, R. Jana, M. Mühlstädt, S. Maenz, J. Andrews, Z. Su, C. Grasl, K.D. Jandt
Macromolecules 49 (2016) 3550-3558. doi: 10.1021/acs.macromol.6b00153Externer Link

180. Zwitterionic cellulose carbamate with regioselective substitution pattern: a coating material possessing antimicrobial activity
T. Elschner, C. Luedecke, D. Kalden, M. Roth, B. Loeffler, K.D. Jandt, T. Heinze
Macromolecular Bioscience 16 (2016) 522-534. doi: 10.1002/mabi.201500349Externer Link

179. Antibacterial effect of silver (I) carbohydrate complexes on oral pathogenic key species in vitro
M. Reise, M. Gottschaldt, C. Matz, A. Völpel, K.D. Jandt, U.S. Schubert, B.W. Sigusch
BMC Oral Health 16 (2016) 1-9. doi: 10.1186/s12903-016-0201-4Externer Link

178. All-solid-state cable-type supercapacitors with ultra-high rate capability
R. Vellacheri, H.P. Zhao, M. Mühlstädt, J. Ming, A. Al-Haddad, M.H. Wu, K.D. Jandt, Y.Lei
Advanced Materials Technologies 1 (2016) 1-7. doi: 10.1002/admt.201600012Externer Link

177. Effects of oxygen plasma treatment on interfacial shear strength and post-peak residual strength of a PLGA fiber-reinforced brushite cement
S. Maenz, M. Hennig, M. Mühlstädt, E. Kunisch, M. Bungartz, O. Brinkmann, J. Bossert, R.W. Kinne, K.D. Jandt
Journal of the Mechanical Behavior of Biomedical Materials 57 (2016) 347-358. doi: 10.1016/j.jmbbm.2016.01.030Externer Link

176. Template assisted surface microstructuring of flowable dental composites and its effect on microbial adhesion properties
N. Frenzel, S. Maenz, V. Sanz-Beltrán, A. Völpel, M. Heyder, B.W. Sigusch, C. Lüdecke, K.D. Jandt
Dental Materials 32 (2016) 476-487. doi: 10.1016/j.dental.2015.12.016Externer Link

175. Arthroscopic-assisted intraosseous balloon-assisted repositioning of a tibial plateau fracture: a case report
O. Brinkmann, M. Rau, S. Maenz, M. Bungartz, G. Matziolis
Acta Chirurgiae Orthopaedicae et Traumatologiae Čechoslovaca 82 (2015) 437-439. doi: http://www.achot.cz/detail.php?stat=795Externer Link

174. Mechanical properties of microwave cured glass fibre epoxy composites prepared by resin transfer moulding
S. Maenz, M. Mühlstädt, K.D. Jandt, J. Bossert
Journal of Composite Materials 49 (2015) 2839-2847. doi: 10.1177/0021998314557295Externer Link

173. Post Report on the Euro BioMAT 2015 in Weimar Biomaterials for a changing Society
K.D. Jandt
International Journal of Materials Research 106 (2015) 928-928.

172. Mechanisms and kinetics of the crystal thickening of poly(butadiene)-block-poly(ethylene oxide) during annealing within the melting range
S. Hölzer, T.N. Büttner, R. Schulze, M.M.L. Arras, F.H. Schacher, K.D. Jandt, U.S. Schubert
European Polymer Journal 68 (2015) 10-20. doi: 10.1016/j.eurpolymj.2015.04.010Externer Link

171. Quantitative characterization of endothelial cell morphologies depending on shear stress in different blood vessels of domestic pigs using a focused ion beam and high resolution scanning electron microscopy (FIB-SEM)
T. T. Pham, S. Maenz, C. Lüdecke, C. Schmerbauch, U. Settmacher, K. D. Jandt, J. Bossert, J. Zanow
Tissue and Cell 47 (2015) 205-212. doi: 10.1016/j.tice.2014.12.005Externer Link

170. Preparation and in-vitro analysis of a polyethylenimine coating on hernia meshes
H. Scheuerlein, J. Erdmann, F. Rauchfuss, Y. Dittmar, K.D. Jandt, U. Settmacher, S. Zankovych
Zentralblatt für Chirurgie 140 (2015) 170-178. doi: 10.1055/s-0033-1351003Externer Link

169. Quantitative characterization of endothelial cell morphologies depending on shear stress in different blood vessels of domestic pigs using a focused ion beam and high resolution scanning electron microscopy (FIB-SEM)
T.T. Pham, S. Maenz, C. Lüdecke, C. Schmerbauch, U. Settmacher, K.D. Jandt, J. Bossert, J. Zanow
Tissue and Cell 47 (2015) 205-212. doi: 10.1016/j.tice.2014.12.005Externer Link

168. Enveloping self-assembly of carbon nanotubes at copolymer micelle cores
M.M.L. Arras, C. Schillai, K.D. Jandt
Langmuir 30 (2014) 14263-14269. doi: 10.1021/la502298jExterner Link

167. Discrimination between random and non-random processes in early bacterial colonization on biomaterial surfaces: application of point pattern analysis
D. Siegismund, A. Schroeter, C. Lüdecke, A. Undisz, K.D. Jandt, M. Roth, M. Rettenmayr, S. Schuster, S. Germerodt
Biofouling: The Journal of Bioadhesion and Biofilm Research 30 (2014) 1023-1033. doi: 10.1080/08927014.2014.958999Externer Link

166. Was Praktiker über LED- Fotopolymerisationslampen wissen sollten
K.D. Jandt, B.W. Sigusch
ZWR - Das Deutsche Zahnärzteblatt 123 (2014) 464-470. doi: 10.1055/s-0034-1396039Externer Link

165. Enhanced mechanical properties of a novel, injectable, fiber-reinforced brushite cement.
S. Maenz, E. Kunisch, M. Mühlstädt, A. Böhm, V. Kopsch, J. Bossert, R.W. Kinne, K.D. Jandt
Journal of the Mechanical Behavior of Biomedical Materials 39 (2014) 328-338. doi: 10.1016/j.jmbbm.2014.07.028Externer Link

164. Colonization of Enterococcus faecalis in a new SiO/SiO2-microtube in vitro model system as a function of tubule diameter
B.W. Sigusch, S. Kranz, S. Klein, A. Volpel, S. Harazim, S. Sanchez, D.C. Watts, K.D. Jandt, O.G. Schmidt, A. Guellmar
Dental Materials 30 (2014) 661-668. doi: 10.1016/j.dental.2014.03.003Externer Link

163. Reduction of ferrihydrite with adsorbed and coprecipitated organic matter: microbial reduction by Geobacter bremensis vs. abiotic reduction by Na-dithionite
K. Eusterhues, A. Hädrich, J. Neidhardt, K. Küsel, T.F. Keller, K.D. Jandt, K.U. Totsche
Biogeosciences 11 (2014) 4953-4966. doi: 10.5194/bgd-11-6039-2014Externer Link

162. Biomimetic 3D hydroxyapatite architectures with interconnected pores based on electrospun biaxially orientated PCL
Z. Su, J. Li, Z. Ouyang, M.M.L. Arras, G. Wei, K.D. Jandt
RSC Advances 4 (2014) 14833-14839. doi: 10.1039/C3RA46457AExterner Link

161. How different mesophases affect the interactive crystallisation of a block co-oligomer
X. Zhang, R. Schulze, P. Zhang, C. Lüdecke, X. Zhang, Z. Su, K.D. Jandt
Polymer 55 (2014) 1893-1900. doi: 10.1016/j.polymer.2014.02.025Externer Link

160. How the calorimetric properties of a crystalline copolymer correlate to its surface nanostructures
R. Schulze, M.M.L. Arras, C. Helbing, S. Hölzer, U.S. Schubert, T.F. Keller, K.D. Jandt
Macromolecules 47 (2014) 1705-1714. doi: 10.1021/ma401984tExterner Link

159. Pathway mediated microstructures and phase morphologies of asymmetric double crystalline co-oligomers
X. Zhang, Z. Ouyang, R. Schulze, T. Keller, K.D. Jandt, Z. Su
RSC Advances 4 (2014) 7900-7910. doi: 10.1039/C3RA47499BExterner Link

158. Reproducible Biofilm Cultivation of Chemostat-Grown Escherichia coli and Investigation of Bacterial Adhesion on Biomaterials Using a Non-Constant-Depth Film Fermenter
C. Lüdecke, K.D. Jandt, D. Siegismund, M.J. Kujau, E. Zang, M. Rettenmayr, J. Bossert, M. Roth
PLoS ONE 9(1): e84837. doi: 10.1371/journal.pone.0084837Externer Link

157. Alignment of multi-wall carbon nanotubes by disentanglement in ultra-thin melt-drawn polymer films
M.M.L. Arras, C. Schillai, T.F. Keller, R. Schulze, K.D. Jandt
Carbon 60 (2013) 366-378. doi: 10.1016/j.carbon.2013.04.049Externer Link

156. A brief history of LED photopolymerization
K.D. Jandt, R.W. Mills
Dental Materials 29 (2013) 605-617. doi: 10.1016/j.dental.2013.02.003Externer Link

155. Physical vapor deposited titanium thin films for biomedical applications: reproducibility of nanoscale surface roughness and microbial adhesion properties
C. Lüdecke, J. Bossert, M. Roth, K.D. Jandt
Applied Surface Science 280 (2013) 578-589. doi: 10.1016/j.apsusc.2013.05.030Externer Link

154. Antibacterial effect of different root canal sealers on three bacterial species
M. Heyder, S. Kranz, A. Volpel, W. Pfister, D.C. Watts, K.D. Jandt, B.W. Sigusch
Dental Materials 29 (2013) 542-549. doi: 10.1016/j.dental.2013.02.007Externer Link

153. Facets of protein assembly on nanostructured titanium oxide surfaces
T.F. Keller, J. Reichert, T.P. Thanh, R. Adjiski, L. Spiess, L. Berzina-Cimdina, K.D. Jandt, J. Bossert
Acta Biomaterialia 9 (2013) 5810-5820. doi: 10.1016/j.actbio.2012.10.045Externer Link

152. Cu on porous glass: An easily recyclable catalyst for the microwave-assisted azide-alkyne cycloaddition in water
K. Jacob, A. Stolle, B. Ondruschka, K.D. Jandt, T.F. Keller
Applied Catalysis A: General 451 (2013) 94-100. doi: 10.1016/j.apcata.2012.10.031Externer Link

151. The effect of polyelectrolyte multilayer coated titanium alloy surfaces on implant anchorage in rats
S. Zankovych, M. Diefenbeck, J. Bossert, T. Muckley, C. Schrader, J. Schmidt, H. Schubert, S. Bischoff, M. Faucon, U. Finger, K.D. Jandt
Acta Biomaterialia 9 (2013) 4926-4934. doi: 10.1016/j.actbio.2012.08.013Externer Link

150. Protein adsorption on nano-scaled, rippled TiO2 and Si surfaces
J. Sommerfeld, J. Richter, R. Niepelt, S. Kosan, T.F. Keller, K.D. Jandt, C. Ronning
Biointerphases 7 (2012) 1-7. doi: 10.1007/s13758-012-0055-5Externer Link

149. Morphology and structure of polymer layers protecting dental enamel against erosion
M. Beyer, J. Reichert, B.W. Sigusch, D.C. Watts, K.D. Jandt
Dental Materials 28 (2012) 1089-1097. doi: 10.1016/j.dental.2012.07.003Externer Link

148. Single-molecule tracking of fibrinogen dynamics on nanostructured poly(ethylene) films
M. Kastantin, T.F. Keller, K.D. Jandt, D.K. Schwartz
Advanced Functional Materials 22 (2012) 2617-2623. doi: 10.1002/adfm.201102836Externer Link

147. Extended-chain induced bulk morphologies occur at surfaces of thin co-oligomer films
R. Schulze, M.M.L. Arras, G. Li Destri, M. Gottschaldt, J. Bossert, U.S. Schubert, G. Marietta, K.D. Jandt, T.F. Keller
Macromolecules 45 (2012) 4740-4748. doi: 10.1021/ma300643mExterner Link

146. An advanced transformation
K.D. Jandt
Advanced Engineering Materials 14 (2012) B293-B293. doi: 10.1002/adem.201180210Externer Link

145. Biomimetic mineralization: Long-term observations in patients with dentin sensitivity
A. Guentsch, K. Seidler, S. Nietzsche, A.F. Hefti, P.M. Preshaw, D.C. Watts, K.D. Jandt, B.W. Sigusch
Dental Materials 28 (2012) 457-464. doi: 10.1016/j.dental.2012.01.003Externer Link

144. Materials at the interface to life
K.D. Jandt
International Journal of Materials Research 103 (2012) 521-522.

143. Interfacial free energy driven nanophase separation in poly(3-hexylthiophene)/[6,6]-phenyl-C61-butyric acid methyl ester thin films
G. Li Destri, T.F. Keller, M. Catellani, F. Punzo, K.D. Jandt, G. Marletta
Langmuir 28 (2012) 5257-5266. doi: 10.1021/la300229uExterner Link

142. Bioactive TiOB-coating on titanium alloy implants enhances osseointegration in a rat model
C. Schrader, J. Schmidt, M. Diefenbeck, T. Muckley, S. Zankovych, J. Bossert, K.D. Jandt, M. Faucon, U. Finger
Advanced Engineering Materials 14 (2012) B21-B27. doi: 10.1002/adem.201180032Externer Link

141. Euro BioMat 2011
K.D. Jandt
Advanced Engineering Materials 14 (2012) B3-B3. doi: 10.1002/adem.201180201Externer Link

140. Resin-composite cytotoxicity varies with shade and irradiance
B.W. Sigusch, T. Pflaum, A. Volpel, K. Gretsch, S. Hoy, D.C. Watts, K.D. Jandt
Dental Materials 28 (2012) 312-319. doi: 10.1016/j.dental.2011.12.007Externer Link

139. Release of metronidazole from electrospun poly(L-lactide-co-D/L-lactide) fibers for local periodontitis treatment
M. Reise, R. Wyrwa, U. Mueller, M. Zylinski, A. Voelpel, M. Schnabelrauch, A. Berg, K.D. Jandt, D.C. Watts, B.W. Sigusch
Dental Materials 28 (2012) 179-188. doi: 10.1016/j.dental.2011.12.006Externer Link

138. Selectively Promoting or Preventing Osteoblast Growth on Titanium Functionalized with Polyelectrolyte Multilayers
S. Zankovych, J. Bossert, M. Faucon, U. Finger, K.D. Jandt
Advanced Engineering Materials 13 (2011) 12, B454-B461. doi: 10.1002/adem.201180020Externer Link

137. Near-Surface Microstructural Reorganization of UHMWPE under Cyclic Load - A Pilot Study
T.F. Keller, H. Engelhardt, P, Adam, M.C. Galetz, U. Glatzel, K.D. Jandt
Advanced Engineering Materials 13 (2011) 12, B476-B482. doi: 10.1002/adem.201180058Externer Link

136. Focus on Materials in Biomaterials Science
K.D. Jandt
Advanced Engineering Materials 13 (2011) 12, B431-B431. doi: 10.1002/adem.201180300Externer Link

135. Microwave-assisted partial hydrogenation of citral by using ionic liquid-coated porous glass catalysts
T. Gallert, M. Hahn, M. Sellin, C. Schmoger, A. Stolle, B. Ondruschka, T.F. Keller, K.D. Jandt
ChemSusChem 4 (2011) 1654-1661. doi: 10.1002/cssc.201100154Externer Link

134. Stable Extracellular Matrix Protein Patterns Guide the Orientation of Osteoblast-like Cells
J.T. Zhang, J.Q. Nie, M. Muehlstaedt, H. Gallagher, O. Pullig, K.D. Jandt
Advanced Functional Materials 21 (2011) 21, 4079-4087. doi: 10.1002/adfm.201100739Externer Link

133. The effect of plasma chemical oxidation of titanium alloy on bone-implant contact in rats
M. Diefenbeck, T. Mueckley, C. Schrader, J. Schmidt, S. Zankovych, J. Bossert, K.D. Jandt, M. Faucon, U. Finger
Biomaterials 32 (2011) 32, 8041-8047. doi: 10.1016/j.biomaterials.2011.07.046Externer Link

132. Facing Biointerfaces
K.D. Jandt
Advanced Engineering Materials 13 (2011) 10, B333-B333. doi: 10.1002/adem.201180042Externer Link

131. Acids with an equivalent taste lead to different erosion of human dental enamel
M. Beyer, J. Reichert, J. Bossert, B.W. Sigusch, D.C. Watts, K.D. Jandt
Dental Materials 27 (2011) 1017-1023. doi: 10.1016/j.dental.2011.07.001Externer Link

130. Towards ECM-Analogue Three-Dimensional Biointerfaces
K. Liefeith, K.D. Jandt
Advanced Engineering Materials 13 (2011) 9, B263-B263. doi: 10.1002/adem.201180075Externer Link

129. A Comparison of the Cell Compatibility of Poly(ethyleneimine) with that of other Cationic Biopolymers Used in Applications at Biointerfaces
E. Heurich, S. Zankovych, M. Beyer, M. Schnabelrauch, A. Berg, K.D. Jandt
Advanced Engineering Materials 13 (2011) 9, B285-B295. doi: 10.1002/adem.201080105Externer Link

128. Liquid phase hydrogenation of benzalacetophenone: effect of solvent, catalyst support, catalytic metal and reaction conditions
A. Stolle, C. Schmoger, B. Ondruschka, W. Bonrath, T.F. Keller, K.D. Jandt
Chinese Journal of Catalysis 32 (2011) 1312-1322. doi: 10.1016/S1872-2067(10)60249-5Externer Link

127. Freezing of rat tibiae at -20°c does not affect the mechanical properties of intramedullary bone/implant-interface: brief report.
M. Diefenbeck, T. Mueckley, S. Zankovych, J. Bossert, K.D. Jandt, C. Schrader, J. Schmidt, U. Finger, M. Faucon
The open orthopaedics journal 5 (2011) 219-222. doi: 10.2174/1874325001105010219Externer Link

126. Protein-Promoted Synthesis of Pt Nanoparticles on Carbon Nanotubes for Electrocatalytic Nanohybrids with Enhanced Glucose Sensing
G. Wei, F.G. Xu, Z. Li, K.D. Jandt
Journal of Physical Chemistry C 115 (2011) 23, 11453-11460. doi: 10.1021/jp202324qExterner Link

125. Biomimetic growth of hydroxyapatite on super water-soluble carbon nanotube-protein hybrid nanofibers
G. Wei, J.T. Zhang, L. Xie, K.D. Jandt
Carbon 49 (2011) 7, 2216-2226. doi: 10.1016/j.carbon.2011.01.051Externer Link

124. Crystalline Monolayer Ordering at Substrate/Polymer Interfaces in Poly(3-hexyl­thiophene) Ultrathin Films
G.L. Destri, T.F. Keller, M. Catellani, F. Punzo, K.D. Jandt, G. Marletta
Macromolecular Chemistry and Physics 212 (2011) 9, 905-914. doi: 10.1002/macp.201000753Externer Link

123. How the Surface Nanostructure of Polyethylene Affects Protein Assembly and Orientation
T.F. Keller, J. Schonfelder, J. Reichert, N. Tuccitto, A. Licciardello, G.M.L. Messina, G. Marletta, K.D. Jandt
ACS NANO 5 (2011) 4, 3120-3131. doi: 10.1021/nn200267cExterner Link

122. Image Analysis of Endothelial Microstructure and Endothelial Cell Dimensions of Human Arteries - A Preliminary Study
B. Garipcan, S. Maenz, T. Pham, U. Settmacher, K.D. Jandt, J. Zanow, J. Bossert
Advanced Engineering Materials 13 (2011) 1-2, B54-B57. doi: 10.1002/adem.201080076Externer Link

121. Novel 1-D biophotonic nanohybrids: protein nanofibers meet quantum dots
G. Wei, T.F. Keller, J.T. Zhang, K.D. Jandt
Soft Matter 7 (2011) 5, 2011-2018. doi: 10.1039/c0sm01037eExterner Link

120. Templating alpha-Helical Poly(L-lysine)/Polyanion Complexes by Nanostructured Uniaxially Oriented Ultrathin Polyethylene Films
T.F. Keller, M. Muller, W.Y. Ouyang, J.T. Zhang, K.D. Jandt
Langmuir 26 (2010) 24, 18893-18901. doi: 10.1021/la102811vExterner Link

119. Responsive hybrid polymeric/metallic nanoparticles for catalytic applications
J.T. Zhang, G. Wei, T.F Keller, H. Gallagher, C. Stotzel, F.A. Muller, M. Gottschaldt, U.S. Schubert, K.D. Jandt
Macromolecular Materials and Engineering 295 (2010) 1049-1057. doi: 10.1002/mame.201000204Externer Link

118. Fibrinogen Adsorption on Biomaterials - A Numerical Study
D. Siegismund, T.F. Keller, K.D. Jandt, M. Rettenmayr
Macromolecular Bioscience 10 (2010) 10, 1216-1223. doi: 10.1002/mabi.201000120Externer Link

117. Layer-By-Layer Assembly of β-Estradiol Loades Mesoporus Silica Nanoparticles on Titanium Substrates ant ist Implication for Bone Homeostasis
Y. Hu, K.J. Cai, Z. Luo, K.D. Jandt
Advanced Materials 22 (2010) 37, 4146-4150. doi: 10.1002/adma.201000854Externer Link

116. A novel two-level microstructured poly(N-isopropylacrylamide) hydrogel for controlled release
A novel two-level microstructured poly(N-isopropylacrylamide) hydrogel for controlled release
Acta Biomaterialia 6 (2010) 10, 3890-3898. doi: 10.1016/j.actbio.2010.05.009Externer Link

115. Pectin, alginate and gum arabic polymers reduce citric acid erosion effects on human enamel.
M. Beyer, J. Reichert, E. Heurich, K.D. Jandt, B.W. Sigusch
Dental Materials 26 (2010) 9, 831-839. doi: 10.1016/j.dental.2010.04.008Externer Link

114. Foundation for chinese-german cooperation in advanced biomedical nanostructures laid
K.Y. Cai, K.D. Jandt
Advanced Engineering Materials 12 (2010) B396-B396. doi: 10.1002/adem.201080044Externer Link

113. Biomimetic mineralization: effects on human enamel in vivo
A. Guentsch, S. Busch, K. Seidler, U. Kraft, S. Nietzsche, P.M. Preshaw, J. N. Chromik, E. Glockmann, K.D. Jandt, B.W. Sigusch
Advanced Engineering Materials 12 (2010) B571-B576. doi: 10.1002/adem.201080008Externer Link

112. Degree of conversion of luting resins around ceramic inlays in natural deep cavities: a micro-raman spectroscopy analysis
U. Lohbauer, M. Pelka, R. Belli, J. Schmitt, E. Mocker, K.D. Jandt, F.A. Muller
Operative Dentistry 35 (2010) 579-586. doi: 10.2341/10-012-LExterner Link

111. Chitosan as a support for heterogeneous Pd catalysts in liquid phase catalysis
S.E. Leonhardt, A. Stolle, B. Ondruschka, G. Cravotto, C. De Leo, K.D. Jandt, T.F. Keller
Applied Catalysis A-General 379 (2010) 1-2, 30-37. doi: 10.1016/j.apcata.2010.02.029Externer Link

110. Quantification of dental erosion-A comparison of stylus profilometry and confocal laser scanning microscopy (CLSM)
E. Heurich, M. Beyer, K.D. Jandt, J. Reichert, V. Herold, M. Schnabelrauch, B.W. Sigusch
Dental Materials 26 (2010) 4, 326-336. doi: 10.1016/j.dental.2009.12.001Externer Link

109. Micro-structured smart hydrogels with enhanced protein loading and release efficiency
J.T. Zhang, S. Petersen, M. Thunga, E. Leipold, R. Weidisch, X.L. Liu, A. Fahr, K.D. Jandt
Acta Biomaterialia 6 (2010) 4, 1297-1306. doi: 10.1016/j.actbio.2009.11.005Externer Link

108. Controlled assembly of protein-protected gold nanoparticles on noncovalent functionalized carbon nanotubes
G. Wei, C. Pan, J. Reichert, K.D. Jandt
Carbon 48 (2010) 3, 645-653. doi: 10.1016/j.carbon.2009.10.006Externer Link

107. The Janus-SAM Approach for the Flexible Functionalization of Gold and Titanium Oxide Surfaces.
R. Bhat, S. Sell, R. Wagner, J.T. Zhang, C.J. Pan, B. Garipcan, W. Boland, J. Bossert, E. Klemm, K.D. Jandt
Small 6 (2010) 3, 465-470. doi: 10.1002/smll.200900670Externer Link

106. The influence of various light curing units on the cytotoxicity of dental adhesives
B.W. Sigusch, T. Pflaum, A. Voelpel, M. Schinkel, K.D. Jandt
Dental Materials 25 (2009) 11, 1446-1452. doi: 10.1016/j.dental.2009.06.016Externer Link

105. Inkjet printing of laminin gradient to investigate endothelial cellular alignment
K. Cai, H.D. Dong, C. Chen, L. Yang, K.D. Jandt, L.H. Deng
Colloids and Surfaces B-Biointerfaces 72 (2009) 2, 230-235. doi: 10.1016/j.colsurfb.2009.04.008Externer Link

104. Formation and Topotactical Orientation of Fibrinogen Nanofibrils on Graphite Nanostructures
J. Reichert, G. Wei, K.D. Jandt
Advanced Engineering Materials 11 (2009) 11, B177-B181. doi: 10.1002/adem.200900084Externer Link

103. A Method for the Real-Time Observation of Endodermal Cell Behavior on Micropatterned Surfaces
D.C. Trimbach, D. Spitkovsky, B. Garipcan, S. Zankovych, C. Boettinger, Y. Duan, J. Hescheler, K.D. Jandt
Advanced Engineering Materials 11 (2009) 8, B106-B113. doi: 10.1002/adem.200900083Externer Link

102. Future perspectives of resin-based dental materials
K.D. Jandt, B.W. Sigusch
Dental Materials 25 (2009) 8, 1001-1006. doi: 10.1016/j.dental.2009.02.009Externer Link

101. Monodisperse, Temperature-Sensitive Microgels Crosslinked by Si-O-Si Bonds
J.T. Zhang, C.J. Pan, T. Keller, R. Bhat, M. Gottschaldt, U.S. Schubert, K.D. Jandt
Macromolecular Materials and Engineering 294 (2009) 6-7, 396-404. doi: 10.1002/mame.200900038Externer Link

100. Surface mediated in situ differentiation of mesenchymal stem cells on gene-functionalized titanium films fabricated by layer-by-layer technique
Y. Hu, K. Cai, Z. Luo, R. Zhang, L. Yang, L.H. Deng, K.D. Jandt
Biomaterials 30 (2009) 21, 3626-3635. doi: 10.1016/j.biomaterials.2009.03.037Externer Link

99. Multiparametric optimization of polymer solar cells: A route to reproducible high efficiency
.A. Renz, T. Keller, M. Schneider, S. Shokhovets, K.D. Jandt, G. Gobsch, H. Hoppe
Solar Energy Materials and Solar Cells 93 (2009) 4 Sp.Iss. SI, 508-513. doi: 10.1016/j.solmat.2008.11.001Externer Link

98. Effect of O-2-Plasma Treatment on Surface Characteristics and Osteoblast-Like MG-63 Cells Response of Ti-30Nb-1Fe-1Hf Alloy
E.Y. Wu, K.L. Ou, S.F. Ou, K.D. Jandt, Y.N. Pan
Materials Transactions 50 (2009) 4, 891-898. doi: 10.2320/matertrans.MER2008408Externer Link

97. Temperature-Sensitive Simultaneous Interpenetrating Polymeric Networks With Improved Mechanical Properties and Shrinking Kinetics
J.T. Zhang, M. Thunga, S. Petersen, R. Bhat, X.L. Liu, R. Weidisch, A. Fahr, K.D. Jandt
Advanced Engineering Materials 11 (2009) 3, B12-B19. doi: 10.1002/adem.200800266Externer Link

96. A practical approach for ambient-pressure hydrogenations using Pd on porous glass
C. Schmogger, A. Stolle, W. Bonrath, B. Ondruschka, T.F. Keller, K.D. Jandt
ChemSusChem 2 (2009) 77-82. doi: 10.1002/cssc.200800168Externer Link

95. Temperature-sensitive PVA/PNIPAAm semi-IPN hydrogels with enhanced responsive properties
J.T. Zhang, R. Bhat, K.D. Jandt
Acta Biomaterialia 5 (2009) 1, 488-497. doi: 10.1016/j.actbio.2008.06.012Externer Link

94. Novel Biopolymeric Template for the Nucleation and Growth of Hydroxyapatite Crystals Based on Self-Assembled Fibrinogen Fibrils
G. Wei, J. Reichert, J. Bossert, K.D. Jandt
Biomacromolecules 9 (2008) 11, 3258-3267. doi: 10.1021/bm800824rExterner Link

93. Biological materials - Fishing for compliance
K.D. Jandt
Nature Materials 7 (2008) 9, 692-693. doi: 10.1038/nmat2262Externer Link

92. A new strategy to prepare temperature-sensitive poly(N-isopropylacrylamide) microgels
.T. Zhang, X.L. Liu, A. Fahr, K.D. Jandt
Colloid and Polymer Science 286 (2008) 10, 1209-1213. doi: 10.1007/s00396-008-1890-2Externer Link

91. The effect of D,L-lactidyl/epsilon-caproyl weight ratio and chemical microstructure on surface properties of biodegradable poly (D,L-lactide)-co-poly (epsilon-caprolactone) random copolymers
J.Y. Hao, T. Keller, K. Cai, E. Klemm, J. Bossert, K.D. Jandt
Advanced Engineering Materials 10 (2008) 8, B23-B32. doi: 10.1002/adem.200800112Externer Link

90. Multiple Surface Functionalities through Step-by-Step Hydrolysis of Self-Assembled Monolayers
R. Bhat, S. Sell, D.C. Trimbach, S. Zankovych, J.T. Zhang, J. Bossert, E. Klemm, K.D. Jandt
Chemistry of Materials 20 (2008) 16, 5197-5202. doi: 10.1021/cm800326wExterner Link

89. Controlled Self-Assembly and Templated Metallization of Fibrinogen Nanofibrils
G. Wei, J. Reichert, K.D. Jandt
Chemical Communications (2008) 33, 3903-3905. doi: 10.1039/b806316hExterner Link

88. Enhanced Osteoblast Adhesion to Epoxide-Functionalized Surfaces
D.C. Trimbach, B. Keller, R. Bhat, S. Zankovych, R. Pöhlmann, S. Schröter, J. Bossert, K.D. Jandt
Advanced Functional Materials 18 (2008) 12, 1723-1731. doi: 10.1002/adfm.200701491Externer Link

87. Strain-Induced Phase Morphology in Melt Drawn Ultrathin Highly Oriented Block Copolymer Films
T. Keller, C. Semmler, K.D. Jandt
Macromolecular Rapid Communications 29 (2008) 11, 876-884. doi: 10.1002/marc.200800060Externer Link

86. A novel approach to prepare porous poly(N-isopropylacrylamide) hydrogel with superfast shrinking kinetics
J.T. Zhang, K.D. Jandt
Macromolecular Rapid Communications 29 (2008) 7, 593-597. doi: 10.1002/marc.200700778Externer Link

85. Surface Modification of Titanium Thin Film with Chitosan via Electrostatic Self-Assembly Technique and its Influence on Osteoblast Growth Behaviour
K. Cai, Y. Hu, K.D. Jandt, Y. Wang
Journal of Materials Science - Materials in Medicine 19 (2008) 2, 499-506. doi: 10.1007/s10856-007-3184-5Externer Link

84. Growth of Osteoblast-Like Cells on Biomimetic Apatite-Coated Chitosan Scaffolds
I. Manjubala, I. Ponomarev, I. Wilke, K.D. Jandt
Journal of Biomedical Materials Research Part B - Applied Biomaterials 84B (2008) 1, 7-16. doi: 10.1002/jbm.b.30838Externer Link

83. Improved Microcontact Printing of Proteins using Hydrophilic Thermoplastic Elastomers as Stamp Materials
D.C. Trimbach, H. Stapert, J. v. Orselen, K.D. Jandt, C.W.M. Bastiaansen, D.J. Broer
Advanced Engineering Materials 9 (2007) 12, 1123-1128. doi: 10.1002/adem.200700282Externer Link

82. Tuning Cell Adhesion on PTFE Surfaces by Laser Induced Microstructured
J. Reichert, S. Brückner, H. Bartelt, K.D. Jandt
Advanced Engineering Materials 9 (2007) 12, 1104-1113. doi: 10.1002/adem.200700218Externer Link

81. Definition of the Joint Cartilage-Bone Interface by Topological Scanning Technologies: Considerations for Optimized Material Interfaces in Implant Technology
J.A. Mollenhauer, C. Burkardt, W. Nisch, J. Bossert, H.J. Hempel, K.D. Jandt, C. Muehleman
Advanced Engineering Materials 9 (2007) 12, 1097-1103. doi: 10.1002/adem.200700288Externer Link

80. Evolutions, Revolutions and Trends in Biomaterials Science - a Perspective
K.D. Jandt
Advanced Engineering Materials 9 (2007) 12, 1035-1050. doi: 10.1002/adem.200700284Externer Link

79. Influence of Different Light Curing Units on the Cytotoxicity of Various Dental Composites
B. Sigusch. A. Völpel, I. Braun, A. Uhl, K.D. Jandt
Dental Materials 23 (2007) 11, 1342-1348. doi: 10.1016/j.dental.2006.11.013Externer Link

78. Surface Engineering of Titanium Thin Films with Silk Fibroin via Layer-by-Layer Technique and its Effects on Osteoblast Growth Behaviour
K. Cai, Y. Hu, K.D. Jandt
Journal of Biomedical Materials Research 82A (2007) 4, 927-935. doi: 10.1002/jbm.a.31233Externer Link

77. Nanoscale Surface Lamellar Orientation and Lamellar Doubling in Ultra-Thin UHMWPE-PE Films
T. Keller, T. Grosch, K.D. Jandt
Macromolecules 40 (2007) 16, 5812-5819. doi: 10.1021/ma070613xExterner Link

76. Controlling Cell Growth by Nanoparticles
S. Zankovych, J. Bossert, K.D. Jandt
MRS Fall Meeting Proceedings 2006, Boston, USA, Symposium D. Mater. Res. Soc. Symp. Proc. Vol. 950 (2007) 0950-D04-15.

75. Ductile-to-semiductile transition in PP-MWNT nanocomposites
B.K. Satapathy, M. Ganß, R. Weidisch, P. Pötschke, D. Jehnichen, T. Keller, K.D. Jandt
Macromolecular Rapid Communications 28 (2007) 7, 834-841. doi: 10.1002/marc.200600892Externer Link

74. Surface Functionalized Titanium Thin Films: Zeta-Potential, protein Adsorption and Cell Proliferation
K. Cai, M. Frant, G. Hildebrand, K. Liefeith, K.D. Jandt
Colloids and Surfaces B: Biointerfaces 50 (2006) 1, 1-8. doi: 10.1016/j.colsurfb.2006.03.016Externer Link

73. Probing the Future in Functional Soft Drinks on the Nanometre Scale - Towards Tooth Friendly Soft Drinks
K.D. Jandt
Trends in Food Science and Technology 17 (2006) 5, 263-271. doi: 10.1016/j.tifs.2005.11.016Externer Link

72. Does the Nanometre Scale Topography of Titanium Influence Protein Adsorption and Cell Proliferation?
K. Cai, J. Bossert, K.D. Jandt
Colloids and Surface B: Biointerfaces 49 (2006) 2, 136-144. doi: 10.1016/j.colsurfb.2006.02.016Externer Link

71. Mineralisation of Chitosan Scaffolds with Nano-apatite Formation by Double Diffusion Technique
I. Manjubala, S. Scheler, J. Bossert, K D. Jandt
Acta Biomaterialia 2 (2006) 1, 75-84. doi: 10.1016/j.actbio.2005.09.007Externer Link

70. Polysaccharide-Protein Surface Modification of Titanium via a Layer-by-Layer Technique: Characterization and Cell Behaviour Aspects
K. Cai, A. Rechtenbach, J. Hao, J. Bossert, K.D. Jandt
Biomaterials 26 (2005) 30, 5960-5971. doi: 10.1016/j.biomaterials.2005.03.020Externer Link

69. Surface Structure and Composition of Flat Titanium Thin Films as a Function of Film Thickness and Evaporation Rate
K. Cai, M. Müller, J. Bossert, A. Rechtenbach, K.D. Jandt
Applied Surface Science 250 (2005) 1-4, 252-267. doi: 10.1016/j.apsusc.2005.01.013Externer Link

68. Was passiert bei der Zahnschmelzerosion? Neue Erkenntnisse bei Demineralisation und Remineralisation durch Grundlagenforschung und Nanotechnologie
K.D. Jandt
Thüringer Zahnärzte Blatt 5 (2005), 23-27.

67. Time Dependence of Composite Shrinkage using Halogen and LED Light Curing
A. Uhl, R.W. Mills, A.E. Rzanny, K.D. Jandt
Dental Materials 21 (2005) 3, 278-286. doi: 10.1016/j.dental.2004.03.010Externer Link

66. Human Enamel Erosion in Constant Composition Citric Acid Solutions as a Function of Degree of Saturation with Respect to Hydroxyapatite
M.E. Barbour, D.M. Parker, G.C. Allen, K.D. Jandt
Journal of Oral Rehabilitation 32 (2005) 1, 16-21. doi: 10.1111/j.1365-2842.2004.01365.xExterner Link

65. In vitro Demineralization/Remineralization Cycles at Human Tooth Enamel Surfaces Investigated by AFM and Nanoindentation
F. Lippert, D.M. Parker, K.D. Jandt
Journal of Colloid and Interface Science 280 (2004) 2, 442-448. doi: 10.1016/j.jcis.2004.08.016Externer Link

64. Toothbrush Abrasion of Surface Softened Enamel Studied with Tapping Mode AFM and AFM Nanoindentation
F. Lippert, D.M. Parker, K.D. Jandt
Caries Research 38 (2004) 5, 464-472. doi: 10.1159/000079628Externer Link

63. In Situ Remineralisation of Surface Softened Human Enamel Studied with AFM Nanoindentation
F. Lippert, D.M. Parker, K.D. Jandt
Surface Science (2004) 1-3, 105-114. doi: 10.1016/j.susc.2004.01.040Externer Link

62. Susceptibility of Deciduous and Permanent Enamel to Dietary Acid-Induced Erosion Studied with Atomic Force Microscopy Nanoindentation
F. Lippert, D.M. Parker, K.D. Jandt
European Journal of Oral Sciences 112 (2004) 1, 61-66. doi: 10.1111/j.0909-8836.2004.00095.xExterner Link

61. Second Generation LEDs for the Polymerization of Oral Biomaterials
A. Uhl, B.W. Sigusch, K.D. Jandt
Dental Materials 20 (2004) 1, 80-87. doi: 10.1016/S0109-5641(03)00095-2Externer Link

60. The Influence of Storage and Indenter Load on the Knoop Hardness of Dental Composites Polymerized with LED and Halogen Technologies
A. Uhl, C. Michaelis, R.W. Mills, K.D. Jandt
Dental Materials 20 (2004) 1, 21-28. doi: 10.1016/S0109-5641(03)00054-XExterner Link

59. Enamel Dissolution in Citric Acid as a Function of Calcium and Phosphate Concentrations and Degree of Saturation with Respect to Hydroxyapatite
M.E. Barbour, D.M. Parker, G.C. Allen, K.D. Jandt
European Journal of Oral Sciences 111 (2003) 5, 428-433. doi: 10.1034/j.1600-0722.2003.00059.xExterner Link

58. Enamel Dissolution as a Function of Solution Degree of Saturation with Respect to Hydroxyapatite: a Nanoindentation Study
M.E. Barbour, D.M. Parker, K.D. Jandt
Journal of Colloid and Interface Science 265 (2003) 1, 9-14. doi: 10.1016/S0021-9797(03)00087-0Externer Link

57. Characterization of the temperature rise in dental composites polymerized with LED and halogen technology by means of a thermocouple and a high-resolution infrared camera
A. Uhl, K.D. Jandt, R.W. Mills
ournal of Dental Research 82 (2003) Sp.Iss. B, B376-B376.

56. Human enamel dissolution in citric acid as a function of pH in the range 2.30 ≤ pH ≤ 6.30 - a nanoindentation study
M.E. Barbour, D.M. Parker, G.C. Allen, K.D. Jandt
Biomaterials 24 (2003) 10, 1787-1795. doi: 10.1034/j.1600-0722.2003.00039.xExterner Link

55. Nanomechanical properties of deciduous and permanent enamel investigated using AFM nanoindentation
F. Lippert, K.D. Jandt, D.M. Parker
Journal of Dental Research 82 (2003) Sp.Iss. B, B77-B77.

54. Photomitiator dependent composite depth of cure and Knoop hardness with halogen and LED light curing units
A. Uhl, R.W. Mills, K.D. Jandt
Biomaterials 24 (2003) 1787-1795. doi: 10.1016/S0142-9612(02)00532-XExterner Link

53. Polymerization and Light induced Heat of Dental Composites cured with LED and Halogen Technology
A. Uhl, R.W. Mills, K.D. Jandt
Biomaterials 24 (2003) 10, 1809-1820. doi: 10.1016/S0142-9612(02)00585-9Externer Link

52. Surfaces engineering of polymeric films for biomedical applications
P. Rossini, P. Colpo, G. Ceccone, K.D. Jandt, F. Rossi
Materials Science & engineering C: Biomimetic and Supramolecular Systems 23 (2003) 3, Sp.Iss. SI, 353-358. doi: 10.1016/S0928-4931(02)00286-2Externer Link

51. Knoop hardness depth profiles and compressive strength of selected dental composites polymerized with halogen and LED light curing technologies
A. Uhl, R.W. Mills, R.W. Vowles, K.D. Jandt
Journal of Biomedical Materials Research 63 (2002) 6, 729-738. doi: 10.1002/jbm.10390Externer Link

50. Optical power outputs, spectra and dental composite depths of cure, obtained with blue light emitting diode (LED) and halogen light curing units (LCUs)
R.W. Mills, A. Uhl, K.D. Jandt
British Dental Journal 193 (2002) 8, 459-463. doi: 10.1038/sj.bdj.4801597Externer Link

49. Mechanical Properties and Radiopacity of Experimental Glass-Silica-Metal Hybrid Nanocomposites
K.D. Jandt, A.M.O. Al-Jasser, K. Al-Ateeq, R.W. Vowels, G.C. Allen
Dental Materials 18 (2002) 6, 429-435. doi: 10.1016/S0109-5641(01)00064-1Externer Link

48. Influence of soft drinks on the thickness and morphology of in-situ acquired pellicle layer on enamel
M. Finke, D.M. Parker, K.D. Jandt
Journal of Colloid and Interface Science 251 (2002) 2, 263-270. doi: 10.1006/jcis.2002.8428Externer Link

47. High power light emitting diode (LED) arrays versus halogen light polymerization of oral biomaterials: Barcol hardness, compressive strength and radiometric properties
R.W. Mills, A. Uhl, G.B. Blackwell, K.D. Jandt
Biomaterials 23 (2002) 14, 2955-2963. doi: 10.1016/S0142-9612(02)00024-8Externer Link

46. Characterization of Ultra Flat Titanium Oxide Surfaces
P. Cacciafesta, K.R. Hallam, C.A. Oyedopo, A.D.L. Humphris, M.J. Miles, K.D. Jandt
Chemistry of Materials 14 (2002) 2, 777-789. doi: 10.1021/cm0112183Externer Link

45. Further modification to soft drinks to minimise erosion - A study in situ
J.A. Hughes, K.D. Jandt, N. Baker, D. Parker, R.G. Newcombe, M. Eisenberger, M. Addy
Caries Research 36 (2002) 1, 70-74. doi: 10.1159/000057594Externer Link

44. SPM biomaterials 2000 - Proceedings of the 2nd International Conference on Scanning Probe Microscopy in Biomaterials Science - Bristol, United Kingdom - 23 June 2000
(Editorial) K.D. Jandt, R.E. Marchant
Surface Science 491 (2001) 3, V-VI.

43. Atomic Force Microscopy of Biomaterial Surfaces and Interfaces
K.D. Jandt
Surface Science 491 (2001) 3, 303-332. doi: 10.1016/S0039-6028(01)01296-1Externer Link

42. Mechanical properties of in situ demineralised human enamel measured by AFM nanoindentation
M. Finke, J.A. Hughes, D.M. Parker, K.D. Jandt
Surface Science 491 (2001) 3, 456-467. doi: 10.1016/S0039-6028(01)01311-5Externer Link

41. Visualisation of human plasma fibrinogen adsorbed on titanium implant surfaces with different roughness
P. Cacciafesta, K.R. Hallam, A.C. Watkinson, G.C. Allen, M.J. Miles, K.D. Jandt
Surface Science 491 (2001) 3, 405-420. doi: 10.1016/S0039-6028(01)01303-6Externer Link

40. The early stages of native enamel dissolution studied with atomic force microscopy
M. Finke, K.D. Jandt, D.M. Parker
Journal of Colloids and Interface Science 232 (2000) 1, 156-164. doi: 10.1006/jcis.2000.7200Externer Link

39. Aspects of the Physical Chemistry of Polymers, Biomaterials and Mineralised Tissues Investigated with Atomic Force Microscopy (AFM)
K.D. Jandt, M. Finke, P. Cacciafesta
Colloids & Surfaces B: Biointerfaces 19 (2000) 4, 301-314. doi: 10.1016/S0927-7765(00)00139-9Externer Link

38. An investigation of self-reinforced poly(methyl methacrylate) denture base acrylic resin using scanning electron and atomic force microscopy
D.C. Jagger, A. Harrison, K.D. Jandt
International Journal of Prosthodontics 13 (2000) 6, 526-531.

37. Human plasma fibrinogen adsorption on ultraflat titanium oxide surfaces studied with atomic force microscopy
P. Cacciafesta, A.D.L. Humphries, K.D. Jandt, M.J. Miles
Langmuir 16 (2000) 21, 8167-8175. doi: 10.1021/la000362kExterner Link

36. Light Emitting Diode (LED) Polymerisation of Composites: Flexural Properties and Polymerisation Potential
F. Stahl, S. Ashworth, K.D. Jandt, R.W. Mills
Biomaterials 21 (2000) 13, 1379-1385. doi: 10.1016/S0142-9612(00)00029-6Externer Link

35. Ultrasonication as a Method to Study Enamel Demineralisation During Acid Erosion
M. Eisenburger, J. Hughes, N.X. West, K.D. Jandt, M. Addy
Caries Research 34 (2000) 4, 289-294.

34. Ultrasonication as a method to study enamel demineralisation during acid erosion
M. Eisenburger, J. Hughes, N.X. West, K.D. Jandt, M. Addy
Journal of Dental Research 79 (2000) 5, 1206-1206.

33. Erosion of natural enamel measured with atomic force microscopy (AFM)
M. Finke, K.D. Jandt, P.M. Parker
Journal of Dental Research 79 (2000) Sp.Iss. SI, 604-604.

32. Depth of Cure and Compressive Strength of Composites Cured with Blue Light Emitting Diodes (LEDs)
K.D. Jandt, R.W. Mills, G.B. Blackwell, S.H. Ashworth
Dental Materials 16 (2000) 1, 41-47. doi: 10.1016/S0109-5641(99)00083-4Externer Link

31. Composite compressive strength and light spectrum obtained with blue LEDs
K.D. Jandt, R.W. Mills, G.B. Blackwell, S.H. Ashworth
Journal of Dental Research 78 (1999) 5, 1053-1053.

30. Light emitting diode (LED) and halogen curing - Composite depth of cure
R.W. Mills, K.D. Jandt, G.B. Blackwell, S.H. Ashworth
Journal of Dental Research 78 (1999) 5, 1053-1053.

29. Composite and polyglas flexural strength with halogen and blue LED technology
F. Stahl, R.W. Mills, K.D. Jandt
Journal of Dental Research 78 (1999) 5, 1053-1053.

28. Dental composite depth of cure with halogen and blue light emitting diode technology
R.W. Mills, K.D. Jandt, S.H. Ashworth
British Dental Journal 186 (1999) 8, 388-391. doi: 10.1038/sj.bdj.4800120aExterner Link

27. The reinforcement of dentures
D.C. Jagger, A. Harrison, K.D. Jandt
Journal of Oral Rehabilitation 26 (1999) 3, 185-194. doi: 10.1046/j.1365-2842.1999.00375.xExterner Link

26. Surface Fine Structure of Treated Dentine Investigated with Tapping Mode Atomic Force Microscopy (TMAFM)
N. Silikas, D.C. Watts, K.E.R. England, K.D. Jandt
Journal of Dentistry 27, (1999) 2, 137-144. doi: 10.1016/S0300-5712(98)00032-3Externer Link

25. Structure of Microfilled Dental Composite Fractured Surfaces
K.D. Jandt
Probe Microscopy 1 (1999), 323-331.

24. Developments and Perspectives of Scanning Probe Microscopy (SPM) on Organic Materials Systems
K.D. Jandt
Materials Science & Engineering Reports R21 (1998) 5-6, 221-295. doi: 10.1016/S0927-796X(97)00012-0Externer Link

23. Composite depth of cure with halogen and blue LED technology
R.W. Mills, K.D. Jandt
Journal of Dental Research 77 (1998) Sp.Iss. B, 640-640.

22. Mechanical properties of an experimental glass-silica-titanium composite hybrid
A.M.O. Al-Jasser, K. Al-Ateeq, R.W. Vowles, K.D. Jandt
Journal of Dental Research 77 (1998) Sp.Iss. B, 640-640.

21. Dentine surface structure investigated with tapping mode atomic force microscopy
N. Silikas, D.C. Watts, K.E.R. England, K.D. Jandt
Journal of Dental Research 77 (1998) Sp.Iss. B, 810-810.

20. Preliminary investigation of measuring enamel erosion with atomic force microscopy
D.M. Parker, M. Finke, M. Addy, J.A. Hughes, E. MacDonald, K.D. Jandt
Journal of Dental Research 77 (1998) Sp.Iss. B, 845-845.

19. The use of atomic force microscopy to abrade dental materials
R.W. Vowles, K.D. Jandt
Journal of Dental Research 77 (1998) Sp.Iss. B, 949-949.

18. Effect of Monomer Ratio on the Strengthening of Polymer Phase Boundaries by Random Copolymer
C.A. Dai, C.O. Osuji, K.D. Jandt, B.J. Dair, C.K. Ober, E.J. Kramer, C.Y. Hui
Macromolecules 30 (1997) 22, 6727-6736. doi: 10.1021/ma960543mExterner Link

17. Strengthening Polymer Interfaces with Triblock Copolymers
C.A. Dai, K.D. Jandt, D.R. Iyengar, N.L. Slack, K.H. Dai, E.J. Kramer, C.Y. Hui
Macromolecules 30 (1997) 3, 549-560. doi: 10.1021/ma960396sExterner Link

16. Direct Observation of Fracture Mechanisms in Polymer-Layered Silicate Nanocomposites
E. Manias, E.P. Giannelis, W.J. Han, E.J. Kramer, K.D. Jandt
Materials Research Society Symposium Proceedings Boston USA, Vol. 457 (1997) 495-500. doi: 10.1557/PROC-457-495Externer Link

15. Microstructural Evolution of Melt Intercalated Polymer Organically Modified Layered Silicates Nanocomposites
R.A. Vaia, K.D. Jandt, E.J. Kramer, E.P. Giannelis
Chemistry of Materials 8 (1996) 11, 2628-2635.

14. Novel styrene-based copolymers for the strengthening of interfaces between immiscible polymers using hydrogen bonding interactions
B.D. Edgecombe, J.M.J. Frechet, E.J. Kramer, K.D. Jandt, Z. Xu.
Abstracts of Papers of the American Chemical Society 212 (1996) 301-PMSE, Part 2.

13. Microstructure of Block Copolymer Reinforced Interfaces Observed with Frictional Force Microscopy (FFM)
K.D. Jandt, C.A. Dai, E.J. Kramer
Advanced Materials 8 (1996) 8, 660-663. doi: 10.1002/adma.19960080813Externer Link

12. Transient Surface Roughening of Thin Films of Phase Separating Polymer Mixtures
K.D. Jandt, J. Heier, F.S. Bates, E.J. Kramer
Langmuir 12 (1996) 15, 3716-3720. doi: 10.1021/la950753cExterner Link

11. Microscopic Aspects of Polymer-Metal-Epitaxy
K.D. Jandt, M. Buhk, J. Petermann
Journal of Materials Science 31 (1996) 7, 1779-1788. doi: 10.1007/BF00372191Externer Link

10. Direct Observation of Diblock Copolymer Induced Microemulsion at a Polymer / Polymer Interface
Z. Xu, K.D. Jandt, E.J. Kramer, B.D. Edgecombe, J.M. Fréchet
Journal of Polymer Science Part B - Polymer Physics 33 (1995) 17, 2351-2357. doi: 10.1002/polb.1995.090331706Externer Link

9. Kinetics of Polymer Melt Intercalation
R.A. Vaia, K.D. Jandt, E.J. Kramer, E.P. Giannelis
Macromolecules 28 (1995) 24, 8080-8085. doi: 10.1021/ma00128a016Externer Link

8. Observation of Phase Transitions in an Antiferroelectric Liquid Crystal Investigated by Scanning Tunneling Microscopy
K.D. Jandt, S. Tixier, M.J. Towler, J.M. Blackmore, M.J. Miles
J. Appl. Phys. 77 (1995) 122-126. doi: 10.1063/1.359378Externer Link

7. Observation of Phase-Transitions in an Antiferroelectric Liquid-Crystal Investigated by Scanning-Tunneling-Microscopy
K.D. Jandt, S. Tixier, M.J. Towler, J.M. Blackmore, M.J. Miles
Journal of Applied Physics 77 (1995) 1, 122-126. doi: 10.1063/1.359378Externer Link

6. STM Investigations of an Alkane-Metal-System (C32H66/IN)
K.D. Jandt, M.J. Miles, J. Petermann, N.H. Thomson
Polymer Bulletin 33 (1994) 6, 687-691. doi: 10.1007/BF00296083Externer Link

5. Atomic-Force Microscopy of Polymer Single-Crystals and Melt-Drawn Films
M.J. Miles, K.D. Jandt, T.J. McMaster, R.L. Williamson
Colloids and Surfaces A - Physicochemical and Engineering Aspects 87 (1994) 3, 235-243. doi: 10.1016/0927-7757(94)80071-5Externer Link

4. Scanning Force Microscopy of the Crystalline-Amorphous Interface of Ultradrawn Poly(Ethylene)
L.M. Eng, K.D. Jandt, H. Fuchs, J. Petermann
Applied Physics A - Materials Science & Processing 59 (1994) 2, 145-150.. doi: 10.1007/BF00332207Externer Link

3. Surface-Morphology of a Liquid-Crystalline Side-Chain Polymer Investigated by Scanning Force Microscopy
K.D. Jandt, D.G. McDonnell, J.M. Blackmore, M.J. Miles
Polymer Bulletin 32 (1994) 4, 487-492. doi: 10.1007/BF00587892Externer Link

2. A combined scanning tunneling, scanning force, frictional force and attractive force microscope
L.M. Eng, K.D. Jandt, D. Descouts
Review of Scientific Instruments 65 (1994) 390-393. doi: 10.1063/1.1145143Externer Link

1. Shish-Kebab Crystals in Polyethylene Investigated by Scanning Force Microscopy
K.D. Jandt, M. Buhk, M.J. Miles, J. Petermann
Polymer 35 (1994) 11, 2458-2462. doi: 10.1016/0032-3861(94)90789-7Externer Link